Aurora Magnesium Fire Starter 2SA

The Aurora Fire Starter™ S2A With Magnesium is created and manufactured by Solo Scientific in the USA. Their goal was to design and manufacture the best all-around survival fire starter in the world, and they have absolutely done it! The Aurora Fire Starter™ is rugged, and is designed for survival. It uses a large 1/4" (.635cm) diameter composite flint steel rod that has magnesium built into it. The built-in Striking Blade could be a lifesaver! You can wear it on your key ring or around your neck on a lanyard, and if you are ever separated from your pack or knife you will still have everything you need to start a fire. The built-in Super Alloy Striking Blade is made from a tungsten, carbide, cobalt alloy that takes off enough material to start a fire but will not cause excessive wear. This new Super Alloy Striking Blade will not dull and is harder than any knife blade you will find. Our built-in Striking Blade is part of the unit and will not get caught on equipment, break off, or rattle while in combat, or while hunting - like other fire starters that have a blade hanging from a string. Our Aurora Fire Starter™ is designed to function wet or dry. It is machined from solid light-weight aircraft aluminum (NO PLASTIC!), is knurled for grip, and will not break when you need it most. It has an overall length of 3.6" (9.14cm), a diameter of .625" (1.59cm), weighs 1/10lb. (45g). It also has an o-ring seal to prevent the housing from unscrewing and provides protection from corrosion in salt and fresh water environments. Include in all your survival gear and disaster kits for complete emergency preparedness.

Two models are now available, both equipped with a ferrocerium flint steel rod with magnesium within its composition - yielding sparks as hot as 5000 degrees F. Your color choice of either silver or black anodized for both models. The 2SA model is equipped with our life-time Super Alloy Striking Blade (made from tungsten, carbide, and, cobalt).

Note: Super Alloy Striking Blade not shown in above photo.

The Aurora Fire Starter™ comes complete with detailed instructions and several pieces of fire starting material.  Order yours today! Must be 18 years or older to order. Made in USA!

To start a fire using the Aurora Fire Starter™: 1.Place your fire starting material on the ground (plain cotton balls, dryer lint, toilet paper, birch bark, milk weed fluff, cotton wood fluff, burdock, or fine dry grass work, but any fine dry tinder usually found in the wild can be used). 2. Open your Aurora Fire Starter™. 3. Scrape the composite flint steel rod (ferrocerium w/magnesium within its composition)with the built-in Super Alloy Striking Blade (note: for first use it may be necessary to scrape off protective coating on rod first with striking blade) while aiming the hot burning sparks at your tinder and you have FIRE! 

Caution: This is not a toy! Keep the Aurora Fire Starter out of reach of children and do not use or demonstrate  indoors or near any combustible material. Doing so could result in injury, structural damage, or death. Solo Scientific is not responsible for any damages caused by use of the Aurora Fire Starter.